Smart BMS CL 12 100
Smart BMS CL 12 100
The Smart BMS CL 12/100 is a battery management system for Victron lithium-iron-phosphate (LiFePO4) Smart batteries. It is specifically designed for 12V systems with a 12V alternator.
The BMS CL 12/100 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charging sources, or DC loads in the event of low voltage, high voltage, or overtemperature.
The dedicated alternator input provides current limiting and one-way flow from the alternator to the battery, allowing any size alternator (and starter battery) to be safely connected to the Smart Lithium battery(s).
The BMS is also equipped with a remote on/off connector to turn off the BMS (and the system) via a remote switch and a pre-alarm contact, to provide a warning signal before the BMS disconnects the batteries from the system.
Specifications
| Feature | Value |
|---|---|
| batteryCommunicationTerminals | Terminals with M8 circular connectors |
| batteryMinusConnection | Faston tab 6.3 x 0.8 mm |
| chargeDisconnectOutput | |
| chargeDisconnectOutputSource | 10 mA |
| color | Blue (RAL 5012) |
| currentConsumptionRemOff | 5 mA |
| currentConsumptionRemOn | 16 mA |
| depth | 224 mm |
| emission | EN 55014-1, EN-IEC 61000-6-3 |
| height | 65 mm |
| Immunity | EN 55014-2, EN-IEC 61000-6-1, EN-IEC 61000-6-2 |
| inputOutputTerminals | |
| loadDisconnectOutput | |
| loadDisconnectOutputSource | 10 mA |
| material | Aluminum |
| maxCurrent1 | 100 A |
| maxCurrentFuse1 | 125 A |
| maxHumidity | 100% |
| minInputChargeVoltage | 13 V |
| nomBatteryVoltage | 12 V |
| operatingTempRange | |
| powerConnection | M8 bolts |
| powerSupplyCable | |
| preAlarmCurrentRating | 1 A |
| preAlarmOutput | Normally free floating High (Vbat) in case of alarm, max. 1 A |
| protection Category | IP65 |
| remoteTerminals | Remote L and Remote H Use modes of the system on/off: 1. ON when the L and H terminal are interconnected 2. ON when the L terminal is pulled to battery minus (V< 5 V) 3. ON when the H terminal is high (V>3 V) 4. OFF in all other conditions |
| vebusTerminals | |
| weight | 1.6 kg |
| width | 120 mm |